by Engineering | Jul 21, 2021 | 1200 QS-Group, QSG-Group, Quick Start Guides
Controls – 1220-800 by Engineering | Jul 21, 2021 | 1200 QS-Group, QSG-Group, Quick Start Guides High Resolution 8 Relay Outputs – 2 Axis Controls 2 Axis 1200 / 2032 Series Warning It is very important to install limit switches that prevent over...
by Engineering | Nov 25, 2020 | 2032 QS-Group, QSG-Group, Quick Start Guides
Controls -2032 by Engineering | Nov 25, 2020 | 2032 QS-Group, QSG-Group, Quick Start Guides Control Versions: 2032.404.0 Controls 2 Axis 1200 / 2032 Series Instructions When entering Binary Commands or Analog Data inputs the user must wait for the controller...
by Engineering | Jan 23, 2020 | 1200 QS-Group, QSG-Group, Quick Start Guides
Controls – 1220 Series by Engineering | Jan 23, 2020 | 1200 QS-Group, QSG-Group, Quick Start Guides Control Versions: 1220.2.875.0, 1220.4.875.0 1220 Series User Manual Instructions When entering Binary Commands or Analog Data inputs the user must wait for the...
by Alex Bryant | Dec 12, 2016 | 2 Axis Installation-Group, Brushless Motor-Group, Getting Started, Quick Start Guides
Start Procedure - Click Arrow > WARNING This is only recommended for experienced users. For less experienced users we recommend configuring via IPWebcontrol NOTE The following assumes that Sixnet toolkit is installed on the computer and that the user is...
by Alex Bryant | Mar 6, 2015 | 2 Axis Installation-Group, Brushless Motor-Group, Getting Started, IPm WebControl, Quick Start Guides
Requires version 3.00 and higher This assumes that all Location (here) and both axis Motor set up has been completed, wiring is completed and you are ready to track the sun. Sometimes solar trackers can lose position due to mechanical slop, hysteresis or external...
by engineering | Mar 2, 2015 | Brushless Motors, Getting Started, QSG-Group, Quick Start Guides
Unpack your Tracker IPm controller and mount it securely using the mounting feet found in the enclosure. Wire power to the AC-DC power supply (wiring diagrams). Typically 120/240 VAC selectable single phase is supplied. If you ordered a power supply for a...
Recent Comments