by Alex Bryant | Dec 12, 2016 | 2 Axis Installation-Group, Brushless Motor-Group, Getting Started, Quick Start Guides
Start Procedure - Click Arrow > WARNING This is only recommended for experienced users. For less experienced users we recommend configuring via IPWebcontrol NOTE The following assumes that Sixnet toolkit is installed on the computer and that the user is...
by Alex Bryant | Mar 11, 2015 | 2 Axis Installation-Group, Brushless Motor-Group
Connect your tracker to the internet via the ethernet port on top of module. Make certain that your network supports DHCP and allows browsing. If not, see your network administrator. Log on to your Web Control account here. In the dash board, select the Tracker IPm...
by Alex Bryant | Mar 6, 2015 | 2 Axis Installation-Group, Brushless Motor-Group, Getting Started, IPm WebControl, Quick Start Guides
Requires version 3.00 and higher This assumes that all Location (here) and both axis Motor set up has been completed, wiring is completed and you are ready to track the sun. Sometimes solar trackers can lose position due to mechanical slop, hysteresis or external...
by engineering | Aug 28, 2013 | Brushless Motor-Group
Controller Sinking or Sourcing by engineering | Aug 28, 2013 | Brushless Motor-Group Configuration Tracker IPm (except for Brushless motor applications) are generally shipped from the factory with Sourcing as the default setting. This is the common setting...
by engineering | Aug 27, 2013 | 1200 Wiring Diagram-Group, 2 Axis Wiring Diagram-Group, Brushless Motor-Group
2 Axis Brushless Motors Selectable 1x / 2x Wiring Diagrams This drawing provides a simplified overview on how everything connects to motor controllers. See the next diagram for wiring to the motors. The feedback utilizes the pulses from the drive motor Hall...
Recent Comments