• Single or Dual Tracker Controller
  • Large Scale 1 or 2 Axis Tracker Control
Solar Tracker Controller User Manual
  • Home
  • Product Info
  • Where to Buy
Select Page

2 Axis Brushless Motor Configuration in Toolkit-slider

by Alex Bryant | Dec 12, 2016 | 2 Axis Installation-Group, Brushless Motor-Group, Getting Started, Quick Start Guides

Start Procedure - Click Arrow > WARNING This is only recommended for experienced users. For less experienced users we recommend configuring via IPWebcontrol NOTE The following assumes that Sixnet toolkit is installed on the computer and that the user is...

Auto Calibration

by Alex Bryant | Mar 6, 2015 | 2 Axis Installation-Group, Brushless Motor-Group, Getting Started, IPm WebControl, Quick Start Guides

Requires version 3.00 and higher This assumes that all Location (here) and both axis Motor set up has been completed, wiring is completed and you are ready to track the sun. Sometimes solar trackers can lose position due to mechanical slop, hysteresis or external...

QSG – Brushless Motors

by engineering | Mar 2, 2015 | Brushless Motors, Getting Started, QSG-Group, Quick Start Guides

  Unpack your Tracker IPm controller and mount it securely using the mounting feet found in the enclosure. Wire power to the AC-DC power supply (wiring diagrams). Typically 120/240 VAC selectable single phase is supplied. If you ordered a power supply for a...

Recent Posts

  • 1220 Series User Manual
  • Glossary of Terms – 1220 Series
  • Wiring Terminals 1220-800 Series 113
  • Wiring Terminals 1220-800 Series 135
  • Controls – 1220-800

Recent Comments

    Archives

    • September 2022
    • August 2021
    • July 2021
    • November 2020
    • October 2020
    • August 2020
    • June 2020
    • May 2020
    • April 2020
    • January 2020
    • November 2019
    • October 2019
    • August 2019
    • July 2019
    • June 2019
    • May 2019
    • February 2019
    • August 2018
    • November 2017
    • September 2017
    • August 2017
    • July 2017
    • June 2017
    • December 2016
    • March 2015
    • February 2015
    • November 2013
    • August 2013

    Categories

    • 1 Axis Configuration-Group
    • 1 Axis Installation
    • 1 Axis Installation-Group
    • 1 Axis Products-Group
    • 1 Axis Wiring Diagram-Group
    • 1200 QS-Group
    • 1200 Wiring Diagram-Group
    • 1200-800 Wiring Diagram-Group
    • 2 Axis Configuration-Group
    • 2 Axis Installation
    • 2 Axis Installation-Group
    • 2 Axis Products-Group
    • 2 Axis Wiring Diagram-Group
    • 2032 QS-Group
    • 2400 Wiring Diagram-Group
    • Accessories Wiring-Group
    • Accessories-Group
    • Anemometer-Group
    • Brushed Motor-Group
    • Brushless Motor-Group
    • Brushless Motors
    • Calibration 1060 Series-Group
    • Calibration 1200 Series-Group
    • Calibration 2400 Series-Group
    • certified template-group
    • Customer Support-Group
    • FAQ General-Group
    • Getting Started
    • Grid Connect Configuration-Group
    • Grid Connect Installation-Group
    • Grid Connect Wiring Diagram-Group
    • Installation WiFi-Group
    • IPm WebControl
    • Networking-Group
    • Operations 1 Axis-Group
    • Operations 2 Axis-Group
    • Physical Dimensions-Group
    • Product Specifications-Group
    • Products
    • Products-Group
    • QSG-Group
    • Quick Start Guides
    • Sensors-Group
    • Software Load Toolkit – Group
    • Tech Support
    • Trouble Shooting 1 Axis-Group
    • Trouble Shooting 2 Axis-Group
    • Trouble Shooting Grid Connect-Group
    • Trouble Shooting Networks-Group
    • Trouble Shooting WiFi-Group
    • Uncategorized
    • User Manuals

    Meta

    • Log in
    • Entries feed
    • Comments feed
    • WordPress.org