by Engineering | Nov 25, 2020 | 1200 QS-Group, QSG-Group, Quick Start Guides
Controls -2032 Control Versions: 2032.404.0 Controls Instructions When entering Binary Commands or Analog Data inputs the user must wait for the controller to pull this data down from the GRIDview server and enter into the control logic. Once the controller...
by Engineering | Aug 23, 2020 | Trouble Shooting 1 Axis-Group, Trouble Shooting 2 Axis-Group, Trouble Shooting Grid Connect-Group
Commands or Data not reaching device I enter Commands or Data and do not see any of the changes in my screen. Trouble Shooting The cause most often is the screen is no longer updating. Refreshing through your browser or check the refresh button near the lower...
by Engineering | Aug 23, 2020 | 2 Axis Products-Group
Single or Dual Tracker Controller Series 1200 ( Selectable 1 or 2 axis ) Manual Home Quick Start Setup & ConfigurationSetup Controls Configuration – GRIDview Controller Sinking or SourcingSet Operational LimitsSetup & Configuration Trouble Shooting...
by Engineering | Aug 21, 2020 | 1 Axis Configuration-Group, 1200 QS-Group, 2 Axis Configuration-Group
Setup & Configuration Control Versions: 1220.2.875.0, 1220.4.875.0, 2032.404.0 Configuration GRIDview RTU Configuration Master Enable: Master Enablement which permits all Control Processes Enable Tracking: Enables NREL SPA to calculate solar position...
by Engineering | Apr 8, 2020 | Trouble Shooting Grid Connect-Group
Trouble Shooting Grid Connect-Group 2400 Series When the tracker reaches minimum or maximum soft limits it will not track. Troubleshooting The soft limits are designed as a final fail safe should the physical limits switches fail. If reached, this will...
Recent Comments