by Alex Bryant | Mar 11, 2015 | 2 Axis Installation-Group, Brushless Motor-Group
Connect your tracker to the internet via the ethernet port on top of module. Make certain that your network supports DHCP and allows browsing. If not, see your network administrator. Log on to your Web Control account here. In the dash board, select the Tracker IPm...
by Alex Bryant | Mar 10, 2015 | Products
Thank you for your submission. A technician will be in contact with you soon. -Support
by Alex Bryant | Mar 6, 2015 | 2 Axis Installation-Group, Brushless Motor-Group, Getting Started, IPm WebControl, Quick Start Guides
Requires version 3.00 and higher This assumes that all Location (here) and both axis Motor set up has been completed, wiring is completed and you are ready to track the sun. Sometimes solar trackers can lose position due to mechanical slop, hysteresis or external...
by Alex Bryant | Mar 6, 2015 | Uncategorized
WARNING: This is only recommended for experienced users. For less experienced users we recommend configuring via IPWebcontrol The following assumes that Sixnet toolkit is installed on the computer and that the user is communicating with the tracker. If this has not...
by Alex Bryant | Mar 6, 2015 | 2 Axis Installation, 2 Axis Installation-Group, Brushless Motors, Trouble Shooting 1 Axis-Group
If the brushless motors for azimuth and altitude changes are not turning in the correct direction when using the manual switches use the following instructions to change the direction. The procedure involves switching the wiring for the reversing relays so that...
Recent Comments