Master / Slave Alignment

by | Oct 16, 2019 | Calibration 2400 Series-Group

A Slave Tracker not having sensor feedback like a Master may consistently run ahead or behind the Master. This could be due to slight differences in the motors, gearing lubrication, mechanical wear on the tracking system. If the variance is not consistent then there...

Limit Switch Deadband

by | Oct 1, 2019 | Grid Connect Configuration-Group

Limit Switch Deadband The control logic calibrates on the Minimum Limit Switch. After a short delay any time the switch is ON the calibration value from FI4 AX1calibrateLS or FI5 AX2calibrateLS will be written to the Pv register ie. FO101 AX1pv_01_1 The limit switch...