PERFORMANCE SPECIFICATIONS
- Industrial powerPC (32 bit data bus)
- Operating system embedded Linux
- Dynamic memory (RAM) 32 Mbytes – 32bit, 0 wait states
- Program memory (Flash) 32 Mbytes
- Retained memory (RAM) 512K (battery-backed)
- Data logging (OPTIONAL)
- Custom programming available
ETHERNET PORT
- 10/100BaseTx (auto-detecting)
- RJ45 connection (auto-crossover)
- Protocols TCP/IP, ARP, UDP, ICNP, DHCP, Modbus/TCP, DNP3 Slave
SERIAL PORT
- RS485 port A screws (485+, 485-, GND) (2-wire half-duplex)
- RS232 Port B RJ45 (TD, RD, CTS, RTS, CD, DTR,DSR, GND)
- Protocols (master & slave) SIXNET & Modbus RTU/ASCII;
- Flow control hardware, software, RTS-party (for radios and RS485)
DISCRETE INPUTS
- 12 channels (sinking or sourcing)
- Guaranteed ON voltage 9 VDC
- Maximum voltage 30 VDC
- Guaranteed OFF voltage & current 5.0 VDC & 1.5 mA DC
- Input resistance 10K Ohms
- Input current @ 24 VDC 3 mA
- Filtered ON/OFF delay 25 mS (20 Hz max. counting)
- Fast ON/OFF delay 4 mS (100 Hz max. counting)
- Count rate (channels 1 – 8) (10 KHz on channel 1)
DISCRETE OUTPUTS
- 4 channels (10-30 VDC)
- Maximum output per channel 1 Amp
- Maximum output per module 4 Amps
- Max. OFF state leakage 0.05 mA
- Minimum load 1 mA
- Inrush current 5 Amps (100 mS surge)
- Typical ON resistance 0.3 Ohms
- Typical ON voltage (@1A) 0.3 VDC
|
ANALOG INPUTS
- 8 channels (4-20 mA, 0-2VDC, 0-5VDC, 0-10VDC)
- A/D resolution 16 bits (0.003%)
- Full scale accuracy +/-0.1% (@20°C)
- Span and offset temp. coef. +/-50 ppm per °C
- Input impedance 100 Ohm
- Current protection Self-resetting fuses
- DMRR (differential mode rejection) 66 dB at 50/60 Hz
ANALOG OUTPUTS
- up to 2 channels (4-20 mA, 0-20mA 0-10VDC with Resistor)
- D/A resolution 16 bits (less than 1?A)
- Full scale accuracy (@20°C) +/- 0.02%
- Span and offset temp. coef. +/- 50 ppm per °C typical
- Max. output settling time 5 mS (to .05%)
- Load resistance range (@ +24 VDC supply) 0-750 Ohms
- Short circuit protection current limiting
ENVIRONMENTAL
- DIN rail or fl at panel mount
- Input power 10-30 VDC
- Input current 100 mA @ 24 VDC (typical)
- Operating Temp: -40 to +70°C (-40 TO 85C storage)
- Shock: IEC60068-2-27,
- Vibration: IEC60068-2-6
- Humidity: 5 to 95% non-condensing
CERTIFICATIONS
- Flammability UL 94V-0 materials
- EMC: emissions FCC, part 15 and Industry Canada, ICES-003 Class A; EN55022; EN61326-1
- EMC immunity EN61326-1 (EN61000-4-2,3,4,6)
- Hazardous Locations: Class I, Div. 2, Groups A,B,C,D, UL1604, CSA C22.2/213, Cenelec EN50021 Zone 2
- Electrical Safety: UL508/CSA22.2/14 (CUL); EN610101; (IEC1010)
|
|
ESAT (Enhanced Single Axis Tracking) is a unique calculation which finds the optimum angle of incidence at the lower solar elevations using the NREL equation. This improves efficiency in the winter months and is standard on all Tracker IPms.