If your Tracker IPm is connected to the Internet, we can update control program using our IPm Web Control otherwise here is the procedure to load from your PC.
See this link for instructions to connect your PC
If you haven’t done it already, down load the I/O Tool Kit software and install it on your Windows PC.
Save them in an accessible folder on your PC.
If you are prompted to Register click here for Registration Instructions
Configure / Configure Station/Module
Select “Files to Load” tab at the top.
Select “Project” button
Select the appli.X6M file previously saved. Open / OK
Operations / Load / Load Advanced (Select Files)
Check only the ISaGRAF box with the directory where you placed the file. Load
The project will automatically run. You are finished.