Solar Tracker Controller User Manual
  • Home
  • Product Info
  • Where to Buy
Select Page

Power Supply Resets

by engineering | Feb 25, 2015 | Brushless Motors, Tech Support, Trouble Shooting 1 Axis-Group, Trouble Shooting 2 Axis-Group | 0 comments

PROBLEM: My power supply cuts out every time my brushless motor stops. The controller reboots as well.

 

POSSIBLE SOLUTION: Check that the current limit adjustment is set at 10 amps. As we use 10 amp motors there is no reason to set it higher as it can cause the power supply to cut out.