POE Injector (Simple)

The simple POE injector uses the 24DC power from the IPm bus. Although the IPm will operate on 12VDC make sure the power to the IPm is the same as required by the POE device.

Simple 24VDV POE injector.

POE Power Wiring

If terminals 24 and 25 are currently being used to power the IPm, remove and replace with the Simple POE power wires.

Red – T24 positive

Black – T25 negative

Insert the RJ45 connector to the Ethernet 10/100 port

Final Connections

Connect POE Radio to the Female RJ45 connector

Reconnect the 24VDC power supply to the IPm at the bottom:

White – T17 positive

Black – T18 negative